Filtration
Filtration configured to current EI and aviation fuel handling practices, including Cat M filter cartridges and filter/separator stages.
Model Range
Seven standard sizes from 50 to 800 US GPM. Pumps are sized to the flow rate and system requirement.
LEM-AS-5050 GPM
LEM-AS-100100 GPM
LEM-AS-150150 GPM
LEM-AS-300300 GPM
LEM-AS-400400 GPM
LEM-AS-600600 GPM
LEM-AS-800800 GPM
Jet A-1 · JP-8 · Avgas · Underwing & overwing
Features
- Designs meet all requirements for military Jet A-1, JP-8 and Avgas dispensing
- Cat M filter cartridges; two filter arrangements
- ASME certified pressure vessels, fabricated in-house
- Skid base with drip/spill containment and drain, carbon or stainless steel
- Forklift pockets and lifting lugs for rapid deployment and relocation
- Stainless steel or aluminum piping
- Pumps sized to flow rate and system requirement, 50 to 800 GPM
- Underwing dry-break couplers, overwing nozzles, or both
- Manual or electric hose reels with roller guides; certified aviation hose, regular or low temp
- Mechanical or electronic meters and registers; air eliminator and temperature probe options
- Control valves including ball, check, solenoid and dead-man valves; additive injection systems; pressure control
- Dual flow rate, dual reel, and off-load / load / dispense configurations
Applications
- Air force base fuel farms and apron dispensing
- Tactical and expeditionary airfield refueling
- Forward arming and refueling points, rotary wing
- Naval air station and coastal fueling facilities
- UAV and training fleet dispensing
- Bowser, tanker and refueller truck loading
Built and Tested In-House
Vessels, piping and skid bases are fabricated in Lemico's Mississauga shop, so quality, schedule and documentation stay under one roof from first weld to final test.
Filtration vessels in fabrication: sampling connections, differential pressure indication, air release and full drain provisions.
Specifications & Testing
Pressure vessels
Pressure vessels designed, fabricated and stamped to ASME Section VIII Div. 1 where a coded vessel is required.
Testing & documentation
Hydrostatic and functional testing with documented results; datasheets, drawings, submittals and manuals at closeout.
Send Us Your Requirements
Send the application, fuel type, flow rate, pressure, drawings or tender documents for review. Lemico is registered with Canada's Controlled Goods Program for defence projects.
Military Aviation Refueling Skid FAQ
Quick answers to common buyer questions.
What flow rates are available?
The LEM-AS range covers 50, 100, 150, 300, 400, 600 and 800 US GPM. Pumps are sized to the flow rate and system requirement of each site.
Which fuels can the skids dispense?
Designs meet the requirements for military Jet A-1, JP-8 and Avgas dispensing, with underwing dry-break couplers, overwing nozzles or both.
What filtration is used?
Cat M filter cartridges in two filter arrangements, with filter/separator stages configured to current EI and aviation fuel handling practices, in ASME certified vessels.
Can the skids be moved between sites?
Yes. Skid bases include forklift pockets and lifting lugs for rapid deployment and relocation, plus drip and spill containment with a drain.
What testing and documentation is provided?
Hydrostatic and functional testing with documented results, plus datasheets, drawings, submittals and manuals at closeout.
Keep Exploring
Related equipment and support that often goes with this page.
Planning a military fueling project?
Share your specification or tender package and we will review it and propose the right LEM-AS configuration.